Q. I had to reinstall Windows and the data previous to the reinstall is in a FAT32 partition in my hard drive. How do I access that data? Whenever I try opening it, I get a pop up from PC Angel.
A. If you formatted the partition while installing, You'll need to run Data Recovery software (Such as Stellar Phoenix) as soon as possible before it's all overwritten. If it's just a separate partition that wasn't touched by the Windows install, you should be able to just browse to the drive letter. I'm not sure what PC Angel is trying to do, but you may need to uninstall PC Angel, or at least disable or kill the process that is preventing you from accessing it. It might help to know what the Pop-up window says. It might help to know that the partition shows up in the disk manager (Start -> Control Panel -> Administrative Tools -> Computer Management -> Disk Management). You might also try changing or adding a drive letter to the partition. Worst case, you can try running Data Recovery software to get the files.
How do you use hiren's boot CD to recover data from a corrupt drive?
Q. I have Windows XP on my desktop. My hard drive is corrupt and won't boot. I've got a hiren's boot disc and feel that there must be some way to recover the information. I've messed around with most of the recovery options, but I can't get anything to actually happen. There are pretty much no instructions. Can anybody help explain how to get data off of my corrupt hard drive?
A. Insert the CD and have your PC boot from CD. Wait a bit, now you should be at a main menu showing all the tools you can use. Navigate to Recovery Tools (or something to that manner) and look for the HDD Regenerator. This will recover your corrupted hard drive.
Have the program scan your entire hard drive and wait a couple of hours depending on the size of your hard drive. It's going to take the whole day if you have a large hard drive (160GB and up), so don't plan on doing anything on your PC while you're scanning. I recommend doing this overnight.
Hope this helps.
Have the program scan your entire hard drive and wait a couple of hours depending on the size of your hard drive. It's going to take the whole day if you have a large hard drive (160GB and up), so don't plan on doing anything on your PC while you're scanning. I recommend doing this overnight.
Hope this helps.
How do you back up your system on a computer?
Q. Am transferring files from my PC to my new laptop but it says to "back up your system" before I do so. And if I don't, what will happen?
A. To back up files to a file or a tape
Using the Windows interface
Open Backup.
The Backup Utility Wizard starts by default, unless it is disabled.
Click the Advanced Mode button in the Backup Utility Wizard.
Click the Backup tab, and then, on the Job menu, click New.
Specify the files and folders you want to back up by selecting the check box to the left of a file or folder in Click to select the check box for any drive, folder, or file that you want to back up.
In Backup destination, do one of the following:
Click File if you want to back up files and folders to a file. This is selected by default.
Click a tape device if you want to back up files and folders to a tape.
In Backup media or file name, do one of the following:
If you are backing up files and folders to a file, type a path and file name for the backup (.bkf) file, or click the Browse button to find a file.
If you are backing up files and folders to a tape, click the tape you want to use.
Specify any backup options you want, such as the backup type and the log file type, by clicking the Tools menu, and then clicking Options. When you have finished specifying backup options, click OK.
Click Start Backup, and then make any changes to the Backup Job Information dialog box.
If you want to set advanced backup options such as data verification or hardware compression, click Advanced. When you have finished setting advanced backup options, click OK. For more information about advanced backup options, see To set advanced backup options.
Click Start Backup to start the backup operation.
Important
You can use Backup to back up and restore data on either FAT16, FAT32, or NTFS volumes. However, if you have backed up data from an NTFS volume used in Windows XP, it is recommended that you restore the data to an NTFS volume used in Windows XP, or you could lose data as well as some file and folder features. Some file systems might not support all features of other file systems. For example, permissions, encrypting file system (EFS) settings, disk quota information, mounted drive information, and Remote Storage information will be lost if you back up data from an NTFS volume used in Windows XP and then restore it to a FAT volume or an NTFS volume used in Windows NT 4.0.
To back up and restore Microsoft SQL Server database files, it is recommended that you use SQL's built-in backup and restore utilities. For more information, see the Microsoft SQL Server documentation.
Some tape drives might not support hardware compression.
Notes
You must be an administrator or a backup operator to back up files and folders. For more information about permissions or user rights, click Related Topics.
To start Backup, click Start, point to All Programs, point to Accessories, point to System Tools, and then click Backup.
If the Backup and Recovery Wizard does not start by default, you can still use it to back up files by clicking the Tools menu, and then clicking Backup Wizard.
If you want to back up your system, you should back up all the data on your computer plus the System State data, which includes such things as the registry and the Active Directory directory service database.
You can only back up the System State data on a local computer. You cannot back up the System State data on a remote computer.
Backup files usually have the extension .bkf, although you can use any extension.
Backup operators and administrators can back up and restore encrypted files and folders without decrypting the files or folders.
If you have Windows Media Services running on your computer, and you want to back up the files associated with these services, see "Running Backup with Windows Media Services" in the Windows Media Services online documentation. You must follow the procedures outlined in the Windows Media Services online documentation before you can back up or restore files associated with Windows Media Services.
Using a command line
Using the Windows interface
Open Backup.
The Backup Utility Wizard starts by default, unless it is disabled.
Click the Advanced Mode button in the Backup Utility Wizard.
Click the Backup tab, and then, on the Job menu, click New.
Specify the files and folders you want to back up by selecting the check box to the left of a file or folder in Click to select the check box for any drive, folder, or file that you want to back up.
In Backup destination, do one of the following:
Click File if you want to back up files and folders to a file. This is selected by default.
Click a tape device if you want to back up files and folders to a tape.
In Backup media or file name, do one of the following:
If you are backing up files and folders to a file, type a path and file name for the backup (.bkf) file, or click the Browse button to find a file.
If you are backing up files and folders to a tape, click the tape you want to use.
Specify any backup options you want, such as the backup type and the log file type, by clicking the Tools menu, and then clicking Options. When you have finished specifying backup options, click OK.
Click Start Backup, and then make any changes to the Backup Job Information dialog box.
If you want to set advanced backup options such as data verification or hardware compression, click Advanced. When you have finished setting advanced backup options, click OK. For more information about advanced backup options, see To set advanced backup options.
Click Start Backup to start the backup operation.
Important
You can use Backup to back up and restore data on either FAT16, FAT32, or NTFS volumes. However, if you have backed up data from an NTFS volume used in Windows XP, it is recommended that you restore the data to an NTFS volume used in Windows XP, or you could lose data as well as some file and folder features. Some file systems might not support all features of other file systems. For example, permissions, encrypting file system (EFS) settings, disk quota information, mounted drive information, and Remote Storage information will be lost if you back up data from an NTFS volume used in Windows XP and then restore it to a FAT volume or an NTFS volume used in Windows NT 4.0.
To back up and restore Microsoft SQL Server database files, it is recommended that you use SQL's built-in backup and restore utilities. For more information, see the Microsoft SQL Server documentation.
Some tape drives might not support hardware compression.
Notes
You must be an administrator or a backup operator to back up files and folders. For more information about permissions or user rights, click Related Topics.
To start Backup, click Start, point to All Programs, point to Accessories, point to System Tools, and then click Backup.
If the Backup and Recovery Wizard does not start by default, you can still use it to back up files by clicking the Tools menu, and then clicking Backup Wizard.
If you want to back up your system, you should back up all the data on your computer plus the System State data, which includes such things as the registry and the Active Directory directory service database.
You can only back up the System State data on a local computer. You cannot back up the System State data on a remote computer.
Backup files usually have the extension .bkf, although you can use any extension.
Backup operators and administrators can back up and restore encrypted files and folders without decrypting the files or folders.
If you have Windows Media Services running on your computer, and you want to back up the files associated with these services, see "Running Backup with Windows Media Services" in the Windows Media Services online documentation. You must follow the procedures outlined in the Windows Media Services online documentation before you can back up or restore files associated with Windows Media Services.
Using a command line
Powered by Yahoo! Answers
